Residential/commercial Mineral Algaecide


Our mineral algaecide contains a proprietary blend of minerals that continuously and effectively eliminates the growth of ALL types of algae the natural way while freeing up low levels of chlorine to be more active and productive in the water to kill bacteria. The blue and black cylinders are packed with the mineral formulation that dissolves out of the cylinder forming a stable residual throughout the pool water within just a few hours and lasts 5-6 months (booster required after 5-6 months or when the water starts turning cloudy or green). During the filtration process the minerals are rejuvenated over and over again every time they pass through the blue or black cylinder which contains a specially treated metal alloy. Our products work with a constant low level of chlorine (0.5 - 1.0 ppm for residential pools), (1.5 - 2.0 ppm for public pools). The blue or black cylinder is good for 12 total months of use. The blue unit treats from 7,000 to 20,000 gallons and the black unit treats from 20-30,000 gallons.  Pools over 30,000 gallons will require 1-booster for every 20,000 gallons over 30,000 gal. Smaller pools with less than 7,000 gallons can purchase one black spa unit for every 1,000 gallons of water.  Install the cylinder at the end of the swimming day.



4 easy steps for Installation

Step 1: For pools open all year or seasonal pools clean or backwash your filter before placing cylinder into the pump basket and allow your residual chlorine to stabilize to .05-1.0 ppm for residential pools (1.5-2.0 ppm for public pools), and balance the pH levels to 7.2-7.6 ppm prior to installation of the cylinder, open seasonal pools as you do every year

Step 2: Place cylinder into pump basket at the end of the swimming day and allow a continuous flow of water, minerals will dissolve in just a few hours 

Step 3: Do not re-clean or back wash filter for two weeks so minerals can totally dissolve through filter

Step 4: Maintain normal chemistry, chlorine 0.5 - 1.0 ppm for residential, 1.5 - 2.0 ppm for commercial pools and pH levels 7.2 - 7.6 plus alkalinity 80 - 120 and cyanuric acid 40 - 50 for outdoor pools, 0-20 for indoor pools.  Run your pump for at least 1.5 turn overs a day and during the heat of the day (remember, the minerals have to circulate through the cylinder to rejuvenate).  All pools should be drained every 4-5 years to remove the total dissolved solids and cyanuric acid build up in the water


  • Blue or black cylinder must be replaced after 12 total months of use
  • Booster should be added after 5 to 6 months of use or when the water starts to turn cloudy or green.  Minerals are only lost through heavy algae kill, filter back wash and splash out. Each booster treats up to 20,000 gallons of water, if your pool has more than 20,000 gallons you will need to purchase a booster (20-30,000 gal = 1-black cylinder and 1-booster, 30-40,000 gal = 1 black cylinder and 1-booster, 40-60,000 gal = one black cylinder and 2-boosters).  Add the booster at the end of the swimming day
  • The booster should be added to the pump basket to dissolve  















Related products